LCD backlit
power specialist Endicott Research Group (ERG) is offering two LED driver
boards that provide compact, economical products to OEM panel designers looking
to get the maximum performance out of their displays.
The new SFDK
Series is a high-efficiency, dual-output driver board with connectors on both
sides of the PCB. It provides a plug-and-play solution for powering LED BLUs in
LCDs up to 22-in. diagonal. The SFDK offers FPC (flat panel compatible) headers
in addition to the standard wire-to-board connections, with the interface
between the driver and panel consisting of 0.5 mm flat flex cable (FFC) with 6,
8, 10, or 12 positions, depending on the display. It has a maximum current of
320 mA and can power up to 8 LED strings at a maximum of 4 on each side.
The SFDK has
an extremely low profile (<8 mm high) and a compact size-1.15in. (29.2 mm) x
4.59in. (116.5 mm). It provides brightness stability over a wide input voltage
(10-20V, with 5V available), external PWM dimming to 500:1, and is compatible
with a number of OEM LED-backlit panels.
ERG's SFD2E
LED driver is a new version of ERG's compact SFDE driver (E for economical)
that packs high power into a compact board. Aimed at high-power,
high-brightness LED BLUs used in LCDs in the 10.4-in. to 24-in. diagonal range,
it can efficiently drive up to 8 LED strings from one output at a maximum
current of 480 mA. It features a wide input voltage design (8-20V), external
PWM dimming to 500:1 and onboard dimming to 255:1. The SFD2E measures 1.115in.
(28.32 mm) wide x 4.585in. (116.5 mm) long, with a low profile of less than 10
mm. It is available with a J12 output connector that is FFC/FPC compatible. The
SFD2E is designed for compatibility with a variety of OEM LCD panels
Pricing:
Approximately $20 in production quantities